en-US
0800 TEAM EURO
(0800 832 638)
My Name:
Email:
I want to claim my $ 50!
Attach Quote:
Please note: This offer only applies if the original quote is provided, it’s important to make sure we are comparing “apples with apples”.

Classic Spouting

ABOUT

Classic-Profile-PictureManufactured in New Zealand since the 1980s, Marley Classic is synonymous with typical kiwi villas and traditional colonial style homes. Classic has internal brackets for a smooth finish and is compatible with all Marley downpipe systems. SHARP STYLE Classic’s sharp, angular lines makes it ideal for framing weatherboard-style houses and the high front face conceals the roof edge visually whilst also protecting the building envelope from the elements. TOUGH AND LONG LASTING Marley Classic spouting is manufactured from uPVC. uPVC is an extremely tough and long-lasting material that will not rust, requires little maintenance and is UV resistant. All Classic components come with a 15-year guarantee.

  • 15 Year Guarantee
  • Will Not Rust
  • Made in NZ
  • 100% Recyclable
  • UV Resistant
  • Design Inspired

Components

Marley Classic™

Product
Component
Code
CLASSIC SPOUTING 3m LengthMC1.3
SPOUTING BRACKETMC2
RH COMBINATION STOPENDMC4
EXPANSION JOINERMC17
INTERNAL ANGLE 90°MC7
EXPANSION OUTLET 80mm With BackplateMC8.80
BACKPLATEMC8B
DROPPER OUTLET 65mmMC11.65
DROPPER OUTLET 100 x 50mmMC11.100.50
GALVANISED NAILS 150 Per PacketMCNAILS
Product
Component
Code
CLASSIC SPOUTING 5m LengthMC1.5
LH COMBINATION STOPENDMC3
SPOUTING JOINERMC5
EXTERNAL ANGLE 90°MC6
EXPANSION OUTLET 65mm With BackplateMC8.65
EXPANSION OUTLET 100 x 50mm With BackplateMC8.100
OUTLET STRAINERRWST
DROPPER OUTLET 80mmMC11.80
WELDING SOLVENT 180g TubeMCS

Technical

Marley Classic™Effective Cross Sectional Area: 6700mm² Flow Capacity: 97 litres/minute Material: uPVC (Unplasticised PVC) Minimum Recommended Fall: 1:2000 Bracket System: Internal brackets. To be spaced at max 500mm centres (reduce to 300mm in high wind or snow prone areas). All Marley Spouting bracket systems create + maintain a 10mm gap between the fascia and the back face of the spouting to allow water to spill to the exterior of the building envelope (as recommended in BRANZ Technical Bulletin Issue 509, “Sizing Gutters and Downpipes”, Clause 4.01). Spouting Capacity:

Rainfall Intensity* (mm/hr)405060708090100110120130140150
Maximum Catchment Area per downpipe(m²)14611797837365585349454239

INSTALLATION

Euro Plumbing offer repairs and installation services for all spouting. Give us a call on 0800 832 638 or contact us today to get a quote.

 

For finance and payment options

Certifications

My Name:
Email:
I want to claim my $ 50!
Attach Quote:
Please note: This offer only applies if the original quote is provided, it’s important to make sure we are comparing “apples with apples”.

A quote will be sent to you within 30 minutes*

+ =
PREVIOUS 

Important

Please provide as many details as possible to simplify the quoting process. If the information you have provided is sufficient, you will be notified within the given times below. If a site visit or any further information is required, our team will advise you accordingly.

Questions?

0800 TEAM EURO

*In peak times quotes can take up to 2 hours, larger quotes are subject to free site visits, you will be advised on progress by email.

loading...

Pay your invoice online!

Enter your Invoice Number below: (e.g. INV-1234)

PLEASE NOTE: You must include the "INV" before entering the invoice number itself. The format must be as follows: INV-12345

Euro Plumbing

Whether it's a quick question or free quote, this form will get you there quickly! Just fill in the details and a team member will be in touch soon.

+ =
Leave a Message